123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281 |
- /*
- * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
- * MD4 Message-Digest Algorithm (RFC 1320).
- *
- * Homepage:
- * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md4
- *
- * Author:
- * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
- *
- * This software was written by Alexander Peslyak in 2001. No copyright is
- * claimed, and the software is hereby placed in the public domain.
- * In case this attempt to disclaim copyright and place the software in the
- * public domain is deemed null and void, then the software is
- * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
- * general public under the following terms:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted.
- *
- * There's ABSOLUTELY NO WARRANTY, express or implied.
- *
- * (This is a heavily cut-down "BSD license".)
- *
- * This differs from Colin Plumb's older public domain implementation in that
- * no exactly 32-bit integer data type is required (any 32-bit or wider
- * unsigned integer data type will do), there's no compile-time endianness
- * configuration, and the function prototypes match OpenSSL's. No code from
- * Colin Plumb's implementation has been reused; this comment merely compares
- * the properties of the two independent implementations.
- *
- * The primary goals of this implementation are portability and ease of use.
- * It is meant to be fast, but not as fast as possible. Some known
- * optimizations are not included to reduce source code size and avoid
- * compile-time configuration.
- */
- #ifndef HAVE_OPENSSL
- #include <string.h>
- #include "md4.h"
- /*
- * The basic MD4 functions.
- *
- * F and G are optimized compared to their RFC 1320 definitions, with the
- * optimization for F borrowed from Colin Plumb's MD5 implementation.
- */
- #define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
- #define G(x, y, z) (((x) & ((y) | (z))) | ((y) & (z)))
- #define H(x, y, z) ((x) ^ (y) ^ (z))
- /*
- * The MD4 transformation for all three rounds.
- */
- #define STEP(f, a, b, c, d, x, s) \
- (a) += f((b), (c), (d)) + (x); \
- (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s))));
- /*
- * SET reads 4 input bytes in little-endian byte order and stores them
- * in a properly aligned word in host byte order.
- *
- * The check for little-endian architectures that tolerate unaligned
- * memory accesses is just an optimization. Nothing will break if it
- * doesn't work.
- */
- #if defined(__i386__) || defined(__x86_64__) || defined(__vax__)
- #define SET(n) \
- (*(MD4_u32plus *)&ptr[(n) * 4])
- #define GET(n) \
- SET(n)
- #else
- #define SET(n) \
- (ctx->block[(n)] = \
- (MD4_u32plus)ptr[(n) * 4] | \
- ((MD4_u32plus)ptr[(n) * 4 + 1] << 8) | \
- ((MD4_u32plus)ptr[(n) * 4 + 2] << 16) | \
- ((MD4_u32plus)ptr[(n) * 4 + 3] << 24))
- #define GET(n) \
- (ctx->block[(n)])
- #endif
- /*
- * This processes one or more 64-byte data blocks, but does NOT update
- * the bit counters. There are no alignment requirements.
- */
- static const void *body(MD4_CTX *ctx, const void *data, unsigned long size)
- {
- const unsigned char *ptr;
- MD4_u32plus a, b, c, d;
- MD4_u32plus saved_a, saved_b, saved_c, saved_d;
- ptr = (const unsigned char *)data;
- a = ctx->a;
- b = ctx->b;
- c = ctx->c;
- d = ctx->d;
- do
- {
- saved_a = a;
- saved_b = b;
- saved_c = c;
- saved_d = d;
- /* Round 1 */
- STEP(F, a, b, c, d, SET(0), 3)
- STEP(F, d, a, b, c, SET(1), 7)
- STEP(F, c, d, a, b, SET(2), 11)
- STEP(F, b, c, d, a, SET(3), 19)
- STEP(F, a, b, c, d, SET(4), 3)
- STEP(F, d, a, b, c, SET(5), 7)
- STEP(F, c, d, a, b, SET(6), 11)
- STEP(F, b, c, d, a, SET(7), 19)
- STEP(F, a, b, c, d, SET(8), 3)
- STEP(F, d, a, b, c, SET(9), 7)
- STEP(F, c, d, a, b, SET(10), 11)
- STEP(F, b, c, d, a, SET(11), 19)
- STEP(F, a, b, c, d, SET(12), 3)
- STEP(F, d, a, b, c, SET(13), 7)
- STEP(F, c, d, a, b, SET(14), 11)
- STEP(F, b, c, d, a, SET(15), 19)
- /* Round 2 */
- STEP(G, a, b, c, d, GET(0) + 0x5a827999, 3)
- STEP(G, d, a, b, c, GET(4) + 0x5a827999, 5)
- STEP(G, c, d, a, b, GET(8) + 0x5a827999, 9)
- STEP(G, b, c, d, a, GET(12) + 0x5a827999, 13)
- STEP(G, a, b, c, d, GET(1) + 0x5a827999, 3)
- STEP(G, d, a, b, c, GET(5) + 0x5a827999, 5)
- STEP(G, c, d, a, b, GET(9) + 0x5a827999, 9)
- STEP(G, b, c, d, a, GET(13) + 0x5a827999, 13)
- STEP(G, a, b, c, d, GET(2) + 0x5a827999, 3)
- STEP(G, d, a, b, c, GET(6) + 0x5a827999, 5)
- STEP(G, c, d, a, b, GET(10) + 0x5a827999, 9)
- STEP(G, b, c, d, a, GET(14) + 0x5a827999, 13)
- STEP(G, a, b, c, d, GET(3) + 0x5a827999, 3)
- STEP(G, d, a, b, c, GET(7) + 0x5a827999, 5)
- STEP(G, c, d, a, b, GET(11) + 0x5a827999, 9)
- STEP(G, b, c, d, a, GET(15) + 0x5a827999, 13)
- /* Round 3 */
- STEP(H, a, b, c, d, GET(0) + 0x6ed9eba1, 3)
- STEP(H, d, a, b, c, GET(8) + 0x6ed9eba1, 9)
- STEP(H, c, d, a, b, GET(4) + 0x6ed9eba1, 11)
- STEP(H, b, c, d, a, GET(12) + 0x6ed9eba1, 15)
- STEP(H, a, b, c, d, GET(2) + 0x6ed9eba1, 3)
- STEP(H, d, a, b, c, GET(10) + 0x6ed9eba1, 9)
- STEP(H, c, d, a, b, GET(6) + 0x6ed9eba1, 11)
- STEP(H, b, c, d, a, GET(14) + 0x6ed9eba1, 15)
- STEP(H, a, b, c, d, GET(1) + 0x6ed9eba1, 3)
- STEP(H, d, a, b, c, GET(9) + 0x6ed9eba1, 9)
- STEP(H, c, d, a, b, GET(5) + 0x6ed9eba1, 11)
- STEP(H, b, c, d, a, GET(13) + 0x6ed9eba1, 15)
- STEP(H, a, b, c, d, GET(3) + 0x6ed9eba1, 3)
- STEP(H, d, a, b, c, GET(11) + 0x6ed9eba1, 9)
- STEP(H, c, d, a, b, GET(7) + 0x6ed9eba1, 11)
- STEP(H, b, c, d, a, GET(15) + 0x6ed9eba1, 15)
- a += saved_a;
- b += saved_b;
- c += saved_c;
- d += saved_d;
- ptr += 64;
- }
- while (size -= 64);
- ctx->a = a;
- ctx->b = b;
- ctx->c = c;
- ctx->d = d;
- return ptr;
- }
- void MD4_Init(MD4_CTX *ctx)
- {
- ctx->a = 0x67452301;
- ctx->b = 0xefcdab89;
- ctx->c = 0x98badcfe;
- ctx->d = 0x10325476;
- ctx->lo = 0;
- ctx->hi = 0;
- }
- void MD4_Update(MD4_CTX *ctx, const void *data, unsigned long size)
- {
- MD4_u32plus saved_lo;
- unsigned long used, available;
- saved_lo = ctx->lo;
- if ((ctx->lo = (saved_lo + size) & 0x1fffffff) < saved_lo)
- ctx->hi++;
- ctx->hi += size >> 29;
- used = saved_lo & 0x3f;
- if (used)
- {
- available = 64 - used;
- if (size < available)
- {
- memcpy(&ctx->buffer[used], data, size);
- return;
- }
- memcpy(&ctx->buffer[used], data, available);
- data = (const unsigned char *)data + available;
- size -= available;
- body(ctx, ctx->buffer, 64);
- }
- if (size >= 64)
- {
- data = body(ctx, data, size & ~(unsigned long)0x3f);
- size &= 0x3f;
- }
- memcpy(ctx->buffer, data, size);
- }
- void MD4_Final(unsigned char *result, MD4_CTX *ctx)
- {
- unsigned long used, available;
- used = ctx->lo & 0x3f;
- ctx->buffer[used++] = 0x80;
- available = 64 - used;
- if (available < 8)
- {
- memset(&ctx->buffer[used], 0, available);
- body(ctx, ctx->buffer, 64);
- used = 0;
- available = 64;
- }
- memset(&ctx->buffer[used], 0, available - 8);
- ctx->lo <<= 3;
- ctx->buffer[56] = ctx->lo;
- ctx->buffer[57] = ctx->lo >> 8;
- ctx->buffer[58] = ctx->lo >> 16;
- ctx->buffer[59] = ctx->lo >> 24;
- ctx->buffer[60] = ctx->hi;
- ctx->buffer[61] = ctx->hi >> 8;
- ctx->buffer[62] = ctx->hi >> 16;
- ctx->buffer[63] = ctx->hi >> 24;
- body(ctx, ctx->buffer, 64);
- result[0] = ctx->a;
- result[1] = ctx->a >> 8;
- result[2] = ctx->a >> 16;
- result[3] = ctx->a >> 24;
- result[4] = ctx->b;
- result[5] = ctx->b >> 8;
- result[6] = ctx->b >> 16;
- result[7] = ctx->b >> 24;
- result[8] = ctx->c;
- result[9] = ctx->c >> 8;
- result[10] = ctx->c >> 16;
- result[11] = ctx->c >> 24;
- result[12] = ctx->d;
- result[13] = ctx->d >> 8;
- result[14] = ctx->d >> 16;
- result[15] = ctx->d >> 24;
- memset(ctx, 0, sizeof(*ctx));
- }
- #endif
|